Automatic Optical Fiber Cable Caterpillar Traction Puller for Cable Production

Automatic Optical Fiber Cable Caterpillar Traction   Puller for Cable Production

Automated optical fiber cable caterpillar traction / puller for cable production
 

I.Products Software:
Mainly used for different cable generation lines for solitary device or entrance and rear double traction.

II.Software:
one. The total frame is created of large-high quality steel plate right after bending and splicing, and the appearance is novel.
2. The products adopts the motor-transmission gearbox, a reduction gearbox, and a tough generate framework of the higher and reduced helical gears, a crawler wheel, secure transmission, large carrying capacity and practical maintenance.
three. The total collection has more than ten specifications of 200kg-15000kg, and there are two kinds of speed regulation buildings of Z4 DC motor or variable-frequency motor for customers to choose.
4. With electronic meter, it can show the line velocity and meter size in time.
5. It is outfitted with a floor shaft transmission composition for end users to use in cable, armor, copper tape shielding and winding generation strains.
six. The rigidity tractor adopts magnetic powder pressure management, which is utilized for the traction of the insulation and sheath extrusion production line. The tension is instantaneously adjustable, stopping the abrasion of the cable in the sink following the extrusion, and properly resolving the synchronization dilemma. And the result of uneven rigidity on the wire diameter.
7. The modest tractor has an general shifting or higher frame shifting structure, which is handy for end users to use in specific procedures and effectively increase the repeated provider daily life of the observe

Equipment specifics

 

III.CZPT Parameter

Model Variety two hundred Sort 300 Type 500 Variety 800 Kind 1250 Sort 1600 Kind 2000
Cable via the outer diameter(mm) two~20 5~25 five~40 8~sixty 10~80 15~one hundred 20~120
Max. traction power(kg) 200 300 500 800 1250 1600 2000
Pace(m/min) 150 one hundred fifty a hundred 100 eighty 80 sixty
Track contact duration(mm) 520 620 750 1200 1500 1900 2100
Track width(mm) 70 70 80 100 a hundred and twenty 120 a hundred thirty five
Quantity of cylinder(pair) three 3 3 five 5 six seven
Motor power(kw) three four five.five 7.five seven.5 11 eleven
Motor pace(rpm) 1500 1500 1500 1500 1500 1500 1500
Heart top(mm) one thousand 1000 1000 a thousand a thousand a thousand a thousand
Total dimension (LxWxH) 1450x720x1500 1500x720x1500 1800x1000x1600 2500x1150x1650 2750x1150x1700 3100x1150x1700 3450x1200x1750

Model Variety 2500 Type 3200 Kind 4000 Kind 5000 Type 6000 Variety 10000 Kind 15000
Cable via the outer diameter(mm) twenty~a hundred thirty 25~a hundred and fifty thirty~a hundred and eighty 50~200 sixty~200 eighty~300 eighty~three hundred
Max. traction force(kg) 2500 3200 4000 5000 6000 ten thousand 15000
Velocity(m/min) 60 45 40 30 25 25 20
Keep track of get in touch with length(mm) 2400 2700 2900 3250 3600 4800 5000
Monitor width(mm) a hundred and forty 145 a hundred sixty five one hundred sixty five one hundred seventy 240 180x2articale/90x2articale
Quantity of cylinder(pair) 8 nine nine 10 eleven fourteen 14+14
Motor power(kw) fifteen 15 eighteen.five 22 30 37 fifty five
Motor speed(rpm) 1500 1500 1500 1500 1500 1500 1500
Heart top(mm) one thousand a thousand one thousand 1000 1000 a thousand a thousand
Overall dimension (LxWxH) 3800x1200x1750 4500x1280x1820 4600x1300x1900 5000x1350x1950 5350x1400x1950 7400x1630x2100 7500x2800x2200

IV. Connected Gear
Cable extrusion device
A.Description
The unit cozy comfortable PVC, this kind of as poly(PVC by sizzling press approach to be extruded insulation wire core)
B.CZPT parameter

 

Variety & Dimension Screw Dia. (mm) L/D ratio Screw velocity (rpm) Major motor (kw) Barrel heating power (kw) Temp. contr. zones (body/cross head) Max. output capacity (PVC) (kg/h)
SJ30X25 twenty 25:1 5-a hundred and fifty eleven three.6 three/2 20
SJ45X25 forty five 25:one ten-one hundred twenty 15 9 3/two 50
SJ65X25 65 twenty five:one ten-100 thirty sixteen 4/4 a hundred and twenty
SJ90X25 90 25:one 10-one hundred 90 30 four/four 280
SJ120X25 120 25:1 seven-68 132 fifty four six/four 580
SJ150X25 a hundred and fifty 25:one 6-60 185 88 six/four 880
SJ200X25 two hundred twenty five:1 4-40 250 a hundred and forty seven/4 1100

Cable consider-up and pay out-off machine
Primarily utilized for winding different signal cables and optical cables.

Cable strander

V. Package deal

VI. Organization profile
HangCZPT Longterm Cable CZPT Co., Ltd is a collection of scientific analysis and advancement and generation of wire and cable tools and a selection of effective power-saving extrusion production line of important enterprises, so considerably, the major solution like wire and cable Insulation and Sheathing manufacturing Line, TQD collection Pneumatic Type belt CZPT, LF series Portal Type Spend-off, LSP series Portal Kind Just take-up, Various Wire Accumulator, Capstan Haul-off, Shell out-off & Just take-up, Cooling Water Trough, and Optical Fiber Tools, Conversation Cable Equipment, Sign Cable Gear.
Our firm has a technical administration team who engages wire and cable gear industrial much more than 20 many years, as nicely as knowledgeable engineer and expert workers, our truthful organization reputation and very good product sales achievement, acquire the trust from our domestic and overseas clients, the merchandise are exported to United States, France, Spain, Portugal, New Zealand, Brazil, Mexico, Chile, South Africa, Zambia, Egypt, South Korea, Singapore, Indonesia, Thailand, Iran, and so forth.
Factory show

Our Team

VII.CZPTer
CZPTer visiting

Cable extrusion manufacturing line in the United states

VIII.FAQ

− Q: Are you the producer or trading business?

     A: We are the producer. We have a team of hugely experienced engineers and experts, who have been doing work in the area of OFC gear for more than 10 several years.

− Q: What is your company’s primary production?

     A: We specialised in optical fiber and optical cable device exploring and manufacturing. Our merchandise contain Optical fiber coloring and rewinding device sequence, Optical fiber secondary coating line collection, Optical cable stranding line, Optical fiber cable sheathing line sequence and other optical cable gear.

− Q: What can we provide our clients?

     A: Our expert production and technological personnel can train our customers’ staff and make certain the clean creation of buyers. And will provide our buyers with after-income services.

− Q: How long is the machine guarantee?

     A: Warranty time period of a single 12 months (given that the completion of mechanical debugging at the buyer’s manufacturing facility)

− Q: Why do I decide on your business?
     A: We have far more than ten years of specialist knowledge in the production of cable machinery, delivering large-good quality, large-protection items.

         We have an experienced group of skilled staff and engineers.

         We can support abroad instruction engineers.

         We can personalize the design, to acknowledge the customer’s sample style.

         We can give customers with after-revenue service.

Some inquiries about the TQD-2500KG Crawler-type Pneumatic Puller from our customer
-Q:How is the belt tension modified? Can this be completed during generation?
A:The two belts of the puller are managed by two sets of upper and decrease cylinders respectively. The upper and lower sets of cylinders are controlled by pressure gauge and stress regulator on the panel to control the pressure.
The lateral pressure of the belt is tensioned by a large cylinder via rocker arm.
Air pressure can be modified online with an air storage bag

-Q: Are the belts pushed at equally finishes or with only (a single pulley push the best and one particular pulley drives the base)?
There are 4 traction wheels, two on the still left are active traction wheels, and two on the proper are passive traction wheels.
Two energetic traction wheels are pushed by a set of helical gears

Allow us to make a quotation for you. pls kindly revert to us for the beneath information:

 1. How many kgs/meters to extrusion for every hour?
 2. Reel/Flange Diameter, we need to quote correct get-up and shell out off device
 3. Could you remember to send out us a photo of your cable composition?
 4. Extrusion material, I indicate cable sheath materials? Cable sheath thickness?
 5.Cable dimensions?
 6.Cable pulling velocity?

Automatic Optical Fiber Cable Caterpillar Traction   Puller for Cable Production